How to fix a broken THICKEN AND OPEN TAP HANDLE QUICKLY?
Turn off the main switch of the faucet first, otherwise it will keep leaking. Then use a hexagonal screwdriver or flat-blade screwdriver to remove the THICKEN AND OPEN TAP HANDLE QUICKLY, because the screws are hidden in the holes, you can observe with a flashlight to determine whether it is a hexagonal screw port or a flat-blade screwdriver, and then use the corresponding screwdriver to loosen, when all the screws are loose Once turned on, the THICKEN AND OPEN TAP HANDLE QUICKLY can be removed. Then remove the metal casing at the connection of the THICKEN AND OPEN TAP HANDLE QUICKLY, and hold the faucet with your hand. Finally, disassemble the handle of the copper core, and then replace it with a new handle and install it.

How to fix a broken THICKEN AND OPEN TAP HANDLE QUICKLY?
Maintenance method of THICKEN AND OPEN TAP HANDLE QUICKLY:
1. Do not use too much force when opening and closing the faucet. You only need to turn the THICKEN AND OPEN TAP HANDLE QUICKLY according to the trend. Excessive force will damage the sealing valve of the faucet, causing the faucet to be lax and leaking.
2. The shower head metal hose of the bathroom faucet should be kept in a natural stretched state. Do not coil it on the faucet when not in use. Be careful not to form a dead angle at the joint between the hose and the valve body, so as not to break or damage the hose. It is necessary to invite experienced and qualified professionals for construction and installation. During installation, the faucet should try not to collide with hard objects, and do not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating.